missing translation for 'onlineSavingsMsg'
Learn More
Learn More
Cole-Parmer™ MP-100 Series Stuart™ Analog Melting Point Apparatus
The MP-100 Series Stuart™ Analog Melting Point Apparatus with integral LED illumination and magnifying lens make viewing easy.
Brand: Cole-Parmer™ 03013-61
Dieser Artikel kann nicht zurückgegeben werden.
Rückgaberichtlinie anzeigen
Beschreibung
- Simple to use—place sample in capillary tube, set heating rate, and watch for melt.
- Test and view three samples at the same time.
- Heat up to 20°C/min. close to melt temperature then set to slower heating rate of 1° to 10°C/min.
- Read temperature mercury-free blue-spirit-filled thermometer.
- Take melting point measurements of up to three samples at once for greater efficiency.
- Easy-to-follow instructions are printed directly on the unit.
- Place your sample in a capillary tube and insert it into the aluminum block.
- Manually set the heating rate between 1°C and 20°C per minute, up to a maximum of 250°C.
- Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading.
- Observe the sample through the magnifying lens until the melt occurs and read the melt temperature from the thermometer.
- Apparatus is supplied with open-ended capillary tubes.
- One end should be sealed with a Bunsen burner; or purchase optional capillary tubes separately that are already sealed.
- Order the optional brass cooling plug to speed up cooling when multiple runs are needed.
Spezifikation
| Melting Point Apparatus | |
| 230 V | |
| 1°C | |
| 140 x 370 x 110 mm | |
| 4.3 in. | |
| 5.5 in. | |
| SMP11 | |
| 122°F to 482°F | |
| 1.7 kg | |
| 370 mm |
| 50 Hz | |
| 50 W | |
| 140 mm | |
| 230 V, 50 Hz, 75 W | |
| 110 mm | |
| 140 mm | |
| 1 Ea. | |
| 50°C to 250°C | |
| 14.6 in. |