General Purpose Laboratory Syringes
General Purpose Laboratory Syringes
Products and replacement parts for use with laboratory syringes; includes syringe caps, tubing, cleaning products, and replacement parts such as needles, barrels, and plungers.
General-purpose syringes are used in many laboratories and other workplaces for drawing up and expelling liquids or suspensions. They are designed to fit appropriate needles, tubing, syringe filters, or similar devices, and are constructed of plastic, glass, or a combination of both. They may also have metal components.
General-purpose syringes comprise a barrel, a plunger, and a terminal fitting for needles or other attachments. Two-part syringes have an integral barrel and terminal fitting, with a separate plunger. Three-part syringes have a plunger fitted with a separate rubber piston at the end. Plastic general-purpose syringes are made from polypropylene or polyethylene and are often single-use and disposable. Syringes with glass barrels frequently have metal plungers and terminal fittings, so tend to offer better overall chemical resistance and durability.
Barrels are normally graduated and transparent so that the contents are clearly visible. Syringe capacities may range from 1 mL up to 50 mL or more. Syringe fittings may be ‘Luer slip’, in which case they have simple ‘push-on’ terminals that hold needles in place just by friction, or ‘Luer-lock’, which twist and lock needles in place for a more secure fit. Luer fittings can be concentric (central to the barrel) or offset (acentric or eccentric).
Applications of General-Purpose Syringes are Widespread:
• General liquid sampling, transfer, or aspiration
• Passing media or cell/microbial cultures through a filter
• Loading electrophoresis gels or chromatography columns
• Injection or sampling of blood or other fluids
• Dispensing viscous liquids, lubricants, or greases
Thermo Scientific™ National Target All-Plastic Disposable Syringes
Use these all-plastic disposable syringes to dispense small volumes of liquids, or to pressure filter through our syringe filters.
Terumo™ Luer-Lock Tip Three-Part Syringe
Terumo™ Luer-Lock Tip Three-Part Syringes are easy to use with their smooth plunger action and have clear barrels to allow quick recognition of air bubbles for more accurate dosing. With easy to read markings, you can be confident you are delivering the intended dose every time.
Socorex™ Dosys™ All-glass Syringes
Resistant borosilicate glass syringes can be sterilized and reused. Socorex™ Dosys™ All-glass Syringes provide a low-cost alternative to disposable plastic syringes and are easy to disassemble for cleaning.
Terumo™ Concentric Luer-Lock Tip Three-Part Syringe, 5mL
Terumo™ Concentric Luer-Lock Tip Three-Part Syringes are easy to use with their smooth plunger action and have clear barrels to allow quick recognition of air bubbles for more accurate dosing. With easy to read markings, you can be confident you are delivering the intended dose every time.
Terumo™ Concentric Luer-Lock Three-Part Syringe
Terumo™ Eccentric Luer-Lock Three-Part Syringes are easy to use with their smooth plunger action and have clear barrels to allow quick recognition of air bubbles for more accurate dosing. With easy to read markings, you can be confident you are delivering the intended dose every time.
Fisherbrand™ Sterile Syringes for Single Use
Manual syringe without needle for research purposes only. Suitable for use with syringe filters
KD Scientific Plastic Syringe
Economical and disposable, available in sizes ranging from 1 cc to 50 cc, Luer Slip (LS) or Luer Lock (LL) tip
KD Scientific Glass Syringe
Economical and reusable glass syringes. Available in sizes ranging from 1 mL to 200 mL.
Hamilton™ 800 Microliter Syringes, No Needle Included
Attached to the flange of the 700 series syringe is a blue Syringe Holder that provides a spot to hold the syringe that will not heat up the barrel causing dispense inaccuracies. Additionally it provides support to small volume plungers that are prone to bending during injection. This series of syringes is ideal for dispensing volumes from 0.5 μL up to 250 μL.
Hamilton™ Microlab™ 600 Diluter/Dispenser System Accessories - (BFP) Syringes
For use with MICROLAB 600 Diluter/Dispenser
Socorex™ Dosys™ Premium Pistol Grip Automatic Syringe
Dose with excellent reproducibility using a corrosion-resistant pistol-grip or two-ring handle automatic syringe. Socorex™ Dosys™ Premium Pistol Grip Automatic Syringe fits either hand comfortably and requires limited effort for efficient work even during long dispensing sessions.
Hamilton™ 1000 Series Gastight™ Saltline Syringes
For use with solutions that have a high salt concentration
Hamilton™ 1 mL, Model 1002.1 TLL SYR, Long Life Instrument Syringe
The BFP syringe manufactured by Hamilton Company is intended for scientific research and laboratory use only and is not intended for human in vivo use.
Socorex™ Dosys™ Classic Pistol Grip Automatic Syringe
Dose with excellent reproducibility using a pistol grip handle automatic syringe. Socorex™ Dosys™ Classic Pistol Grip Automatic Syringe fits either hand comfortably and requires limited effort for efficient work even during long dispensing sessions.
Socorex™ Dosys™ Basic Pistol Grip Automatic Syringe
Dose with excellent reproducibility using a pistol grip handle automatic syringe. Socorex™ Dosys™ Basic Pistol Grip Automatic Syringe fits either hand comfortably and requires limited effort for efficient work even during long dispensing sessions.