man

Test

PAPR Cartridges and Filters

PAPR Cartridges and Filters

Powered air-purifying respirator (PAPR) replaceable particulate filters and vapor cartridges are designed to fit directly into PAPR blower assemblies, facepieces, or headpieces to help protect against dust, particles, and certain gases and vapors in a variety of hazardous environments. They are rated based on the type of contaminant and the percentage of contaminants removed before filtered air reaches the worker. Filters remove dry particulates such as dust. Cartridges remove vapors and gases such as paint thinner and welding vapors.

PAPR filters and cartridges are tested and NIOSH-approved for compatibility and usage. Correct product selection depends on the environment(s) in which the product will be used, and the type(s) of hazard(s) or risk(s) expected to be present.

Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details can be obtained at the individual product level and should be scrutinized during selection.
Product Type 
  • (1)
  • (1)
  • (1)
  • (1)
  • (3)
  • (1)
  • (1)
  • (4)
  • (6)
  • (1)
  • (1)
  • (18)
  • (1)
  • (5)
  • (1)
  • (1)
  • (1)
  • (5)
  • (2)
  • (2)
  • (1)
  • (4)
  • (1)
  • (1)
  • (5)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
Color 
  • (13)
  • (1)
  • (1)
  • (7)
  • (1)
  • (4)
Filter Type 
  • (1)
  • (1)
  • (2)
  • (2)
  • (1)
  • (1)
  • (1)
  • (5)
  • (1)
  • (1)
  • (1)
  • (3)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
Material 
  • (1)
  • (5)
  • (1)
  • (4)
  • (1)
Size 
  • (9)
  • (3)
Keyword Search: facemask Clear all selections

Filtered Search Results

Products from some of our suppliers do not display in filtered search results. Please clear all filters to see these products.

Narrow Results

Selected Filters

Clear all

Keyword Search

facemask

Narrow Results

Narrow Results

No results found within this category. Try removing some selected filters and try again.

category

brands

  • (24)
  • (31)
  • (10)
  • (10)
  • (1)
  • (3)
  • (2)
  • (1)
  • (1)

special offers

  • (9)
  • (7)

Product Type

  • (1)
  • (1)
  • (1)
  • (1)
  • (3)
  • (1)
  • (1)
  • (4)
  • (6)
  • (1)
  • (1)
  • (18)
  • (1)
  • (5)
  • (1)
  • (1)
  • (1)
  • (5)
  • (2)
  • (2)
  • (1)
  • (4)
  • (1)
  • (1)
  • (5)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)

Color

  • (13)
  • (1)
  • (1)
  • (7)
  • (1)
  • (4)

Filter Type

  • (1)
  • (1)
  • (2)
  • (2)
  • (1)
  • (1)
  • (1)
  • (5)
  • (1)
  • (1)
  • (1)
  • (3)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)
  • (1)

Material

  • (1)
  • (5)
  • (1)
  • (4)
  • (1)

Size

  • (9)
  • (3)

With Exhalation Valve

  • (1)
  • (2)
1 – 15 of 63 results
1

3M™ Gas & Vapor Filter GF32 AX

3M™ Gas & Vapor Filter DT-4007E is a DIN 40 threaded, replaceable filter offering AX protection against certain low-boiling point organic vapors.

2

CleanSpace™ Technology ULTRA Power System

The ULTRA Power Unit is a powdered air purifying respirator (PAPR) compatible with the CST Full Face Mask, the CST Half Mask and a range of CST particulate and gas filters.

3

3M™ Gas & Vapor Filter GF22 A2

3M™ Gas & Vapor Filter DT-4001E is a DIN 40 threaded, replaceable filter offering A2 protection against certain organic vapors.

4

3M™ DT Combination Filter

For effective protection against a range of particulates, gases and vapors or combination hazards, use 3M™ Filters DT-Series. Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ Powered Air Respirator System PF-600 Series.

For Use With (Equipment) 3M™ Respirators, 3M™ Powered Air Respirator System
Product Type Filters and Pre-filters
Quantity 10/Cs.
Filter Type Combination
5

3M™ Gas & Vapor Filter GF22 A2B2

3M™ Gas & Vapor Filter DT-4005E is a DIN 40 threaded, replaceable filter offering A2B2 protection against certain organic vapors and inorganic gases.

6

3M™ Cartridge Filter Holder 7586

3M™ Cartridge Filter Holder is for 3M™ 7500 Series Half Masks and includes two inhalation valves and one exhalation valve.

7

3M™ Filter

For effective protection against a range of particulates, gases and vapours or combination hazards, use 3M™ Filters DT-Series.

For Use With (Equipment) 3M Air Respirators
Product Type Filter
Size Standard
8

CleanSpace Technology™ Bio HEPA P3/T3 Filter

The BioHood System is for use with the HALO and is specifically designed for biocontainment units, laboratories and pharmaceutical cleanrooms.

9

CleanSpace Technology™ Bio Exhalation Filter 95

The BioHood System is for use with the HALO and is specifically designed for biocontainment units, laboratories and pharmaceutical cleanrooms.

Promotions are available
10

CleanSpace Technology™ Steri-Plus Exhalation Valve Filter for Source Control

Disposable exhalation valve filter is utilised for source control in sterile settings where filtering of the wearers exhaled air is required.

Promotions are available
11

Honeywell™ RD40 Plastic Filter A2P3

Cost-effective plastic filter protects against hazardous gases, vapors, and particulates.

12

Honeywell™ RD40 Plastic Filter A2B2E2K2 XL

Cost-effective plastic filter protects against hazardous gases, vapors, and particulates.